Clean & Care

Faucets:-

  • Do not use cleaner containing acids, bleach, toxic ammonia. While cleaning the faucets after installation, do not use abrasive cleansers, as they may damage the faucets’ surface. Use warm water and liquid detergent to clean the faucets.
  • Clean the outside surface of the faucets with mild soap and warm water or chalk powder. Wipe the entire surface completely dry with a clean, soft cloth.
  • For perfect foam flow of water, the aerators should be cleaned regularly.
  • Bell is not liable or shall not be responsible for any such damage or for improper installation.

Plastics:-

  • While cleaning the cistern/seat cover after installation, do not use abrasive cleansers, as they may damage the plastic surface. Use warm water and liquid detergent to clean the plastic surface.
  • Do not allow cleansers containing petroleum distillates to remain in contact with plastic surface for long periods of time.
  • Clean the outside surface of the polypropylene product with mild soap and warm water. Wipe the entire surface completely dry with a clean, soft cloth.
  • Bell is not liable or shall not be responsible for any such damage or for improper installation.

Ceramics:-

  • While cleaning the ceramic product after installation, do not use abrasive cleansers, as they may damage the ceramic surface. Use warm water and liquid detergent to clean the ceramic surface.
  • Do not allow cleansers containing petroleum distillates to remain in contact with ceramic surface for long periods of time.
  • Please do not use cement at any hollow portion of the vitreous China product
  • Bell is not liable or shall not be responsible for any such damage or for improper installation.

Electronic systems:-

  • While cleaning the sensor after installation, do not use abrasive cleansers, as they may damage the sensor’s surface. Do not use water to clean the sensor.
  • Do not use caustic detergent. Do not ever strike at the machine directly.
  • Check the battery and power monthly. When the indicator flashes, it is out of power. Please change the batteries.
  • Clean the filter net from time to time (every six or twelve months or whenever the water flow becomes less).
  • Bell is not liable or shall not be responsible for any such damage or for improper installation.

Bath Fittings:-

  • While cleaning the shower product after installation, do not use abrasive cleansers, as they may damage the shower product surface. Use warm water and liquid detergent to clean the shower product.
  • Do not allow cleansers containing petroleum distillates to remain in contact with shower product surface for long periods of time.
  • Clean the outside surface of the acrylic product with mild soap and warm water. Wipe the entire surface completely dry with a clean, soft cloth.
  • Do not use electrical appliances such as heater or fanner thus preventing any kind of electrical shocks.
  • Bell is not liable or shall not be responsible for any such damage or for improper installation.

Kitchen Sinks:-

  • Clean the sink at least once a week. When cleaning use mild soapy water and rub in the direction of the grain lines, rinse and towel dry. Drying is important to eliminate collection of lime scale, mineral deposits and calcium stack.
  • Always rinse the sink after every use and wipe dry.
  • Avoid use of cleaners & bleachers containing harmful chemicals and acid.
  • Avoid prolonged contact with citric or high salt concentration food as it can lead to staining, pitting and corrosion of the sink.
  • Steel wool / wired brushes / abrasive sponge pads are not recommended for cleaning as it leads to scratches and rusting on the sink. Do not use the sink drain board as a cutting or chopping board as it will leave scratches on the sink.
  • Prolonged exposure to sunlight will lead the film coating to stick to the sink and may be difficult to remove later.
  • Do not remove the film coating on the sink before installation to avoid scratches and damage during installation. Remove the film only after installation.
  • Bell is not liable or shall not be responsible for any such damage or for improper installation.
Bell